This will allow you to maintain the same pre-load on the springs as with the original fork tubes. Seeing the tubes are 20mm longer, you will need to install a spacer in the top of the fork tube before installing the caps. Now, there are a couple of other concerns. If yours is the same you should have no problem raising your fork tubes up 20mm in the triple clamp. I just measured the clearance between the top of my triple clamps and the H-frame and found it to be in excess of 30mm. I have asked this question on this forum in the past but have no answers as yet. I am not sure if the MC22 ever had 600mm fork tubes as the stock fork I have also seen the 600mm length advertised which you now have. I have seen fork tubes advertised from Hong Kong (supposedly for the MC22) which were 550mm long. My MC22 has 582mm long fork tubes which are stock. I have seen 3 different fork lengths for the MC22.:huh: First of all, I am assuming you now have two new 600mm fork tubes.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |